LNR Downconverter Model DC11M-D5/D6 Manual
This manual contains operating and maintenance instructions for LNR Downconverter MODEL DC11M-D5/D6 manufactured by LNR COMMUNICATIONS INC., in five functional sections as follows:
The LNR model DCI IM-D5/D6 is a RF frequency translation product, which provides Downlink RF frequency translation functions in a single unit (1 3/4″) high. Its function is to down-convert the Ku-Band receive (10.95-12.75 GHz ) frequency spectrum to an output frequency range of 70 MHz, or 140 MHz
The DCI IM-D5/D6 will address any frequency within the stated receive bandwidth in 125 KHz stepped increments, for D5 models, or 1 KHz. stepped increments for D6 models. The IF bandwidth is intended for operation within a 54 MHz (40 MHz optional) bandwidth centered at 70 MHz (Fo +/- 27 MHz) or within a 72 MHz bandwidth centered at 140 MHz ( Fo +/-36 MHz). Due to its low phase noise and high frequency stability characteristics, the model DCI 1M-D5/D6 is suitable for use with the following service applications:
The model DC11M-D5/D6 may be used as a stand alone down converter, as a single thread receive unit satisfying the frequency translation component requirements for an earth station, or in redundancy with either LNR 1:1 protection switch option or in one for one “switchless” redundancy configuration
The DC11M-D5/D6 is completely self-contained, requiring only AC power to operate. The unit is housed in a standard size rack mountable chassis. All operational controls and indicators are located on the unit front panel. The on / off switch, line cord and all remote control and monitoring function accessibility are located on the rear panel. Local (Front panel) controls are presented in an alpha-numeric menu driven format, via a “back lighted’ LCD display. Individual functions are accessed via front panel keypad switches.